Vehicles
Sections
114 not categorized PORSCHE 996T CUP CARCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 914 1970-76 (includes uncategorized and accessory items) 91150403100GRV3 This is a sheet metal repair cup that is located behind the fuel door. It includes the fuel door hinge mount, lock (part # 901 504 034 20grv), buffer (part # 911 025 679 00) and tube for the pull cable. It is manufactured by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment ...(choose a part on the right to read more)
$284.90
Make a selection 99704400005 Smooth-fitting indoor car cover featuring full-color Porsche logo. designed for use out of the weather, as indoor protection from dust and dirt. Made from a breathable, antistatic material, features full-color Porsche logo. General FitmentACCESSORY
$479.25
Make a selection 99663114380 Please note: this is for cup / r models up to 2001. They have the cut out for the clear headlight corner trim. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$335.50
Make a selection 00004400034 Smooth-fitting indoor car cover featuring full-color Porsche logo. Designed for use out of the weather, as indoor protection from dust and dirt. Made from a breathable, antistatic material, features full-color Porsche logo. General FitmentACCESSORY
$509.53
Make a selection RES99700060SGA Race exhaust system 997 GT3 cup (2010+ 3.8 l)& rsr (2007-10) , stainless steel. - header diameter 55mm - tube diameter 76mm after the headers all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$6,153.40
Make a selection WAP0200040A Detailed collector's model of the Porsche 911 GT3 cup Porsche design car used and presented at the Porsche mobil1 supercup in the run-up to the 2009 fia formula 1 world championship. Base color: white. Made of metal and plastic. 1:43 scale. General FitmentACCESSORY
$60.50
Make a selection 91150403100GRV2 This is a sheet metal repair cup that is located behind the fuel door. It includes the fuel door hinge mount, lock (part # 901 504 034 20grv), buffer (part # 911 025 679 00), fuel door (part # 91150403100gr11 ) and tube for the pull cable. It is manufactured by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part ma...(choose a part on the right to read more)
$422.40
Make a selection TM04B Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving. General Fitment914 1970-76
$137.50
Make a selection HEI600036S Gurtrohr nur in verbindung mit bügel/käfigneubestellung möglich General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 BOXSTER 1997-04 968 1992-95 911 1989-94 CAYENNE 2007-10 CAYENNE 2003-06 944 1982-85 944 1985-88 928 1992-95 924 1980-85 914 1970-76 911 1970-73 356 1960-65
$220.00
Make a selection FVD55091196402 Kit contains: 6x intake-, 6x exhaust valve, 12 x retainers titan, 24 x valve stems, valve springs. General Fitment911 1989-94914 1970-76 911 1970-73
From $2,176.50
Make a selection BRAI159PRSR New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$900.00
Make a selection FVD10397592 Use only when already connecting rods with sps-carr-6 was delivered! General Fitment911 1994-98911 1989-94 914 1970-76 911 1970-73
$62.54
Make a selection FVD50599612KEV This bumper does not bolt directly onto the 996 Carrera, only 996 cup cars!
$2,196.70
Make a selection FVD55091196401 Kit contains: 6x intake-, 6x exhaust valve, 12 x retainers titan, 24 x valve stems, valve springs. General Fitment911 1989-94914 1970-76 911 1970-73
From $2,718.50
Make a selection FVD375002 This mount kit is a solid upgrade like the European super cup cars. They will provide you with a more responsive chassis and faster lap times with a tighter feel to the car. Note: you will experience more vibration and more noise with solid mounts. Be sure to check the fits these models tab as these do not fit every model.
$87.99
Make a selection BES96405000S1 This muffler produces a glorious flat six race car with low deep tones that reminds us of the 964 cup. It is manufactured in Germany by m&m exhaust, gmbh. This muffler is ideal for anyone who wants a lower deeper tone with more decibels, whether they are just replacing the side muffler or are running cat bypass, sport cats or a cup pipe. + 14 hp (10 kw) & + 15 tq (20 nm) gain. - 2 3/4 tubing (70mm). - weighs 13.8 lbs (6.3 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions. - includes factory style hangars and new aero quip style clamps for simple installation. We recommend replacing your exhaust tip with this u...(choose a part on the right to read more)
$1,438.80
Make a selection BK5652 By stephan wilkinson. Wilkinson's spunky and entertaining memoir is a yarn-spinning and wise-cracking romp over the author's many occupations, hobbies, blunders and idiosyncrasies. In a quest to restore a well-used ‘83 911 ends two years and $60,000 later with a car worth far more in hard-earned experience than blue-book value. General FitmentACCESSORY
$75.00
Make a selection TM04 Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving. General Fitment914 1970-76
$137.50
Make a selection TM03B Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving. General Fitment914 1970-76
$137.50
Make a selection HEI6009991
General Fitment911 GT3 2003-05911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 BOXSTER 1997-04 968 1992-95 911 1989-94 944 1982-85 944 1985-88 924 1980-85 914 1970-76 911 1970-73
$38.56
Make a selection BBI9978200001 The bbi autosport Porsche 996 & 997 streetcup roll bar features a 2-piece design and 4130 chrome moly steel tubing (1.5" x .120" main hoop & 1.5" x 0.95" rear hoops) for excellent strength to weight ratio. Taking a sensible design approach, the 2-piece construction allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory bose subwoofers. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes "x" braces on both front and rear sections and each joint has been meticulously tig welded by hand. Bolt-in installation is accomplished by usin...(choose a part on the right to read more)
$2,395.00
Make a selection BES99105060S - + 12 crank hp & + 12 crank torque - 2 3/4 tubing (70mm) straight through design for max. Power - weighs 18 lbs. (8.5 kg), which is a 3 lbs. Savings off of OEM center muffler. - replaces stock side mufflers and stock center muffler. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 2 x 3.5 (90mm) round tips. - includes all necessary clamps and mounting brackets. - made in Germany. - intoxicating cup car growl at idle, partial throttle and wide open throttle. - no dme programming necessary, does not alter emissions, 50 state legal in the u.s. Our 991 GT3 center muffler replacements are vastly different than the baffle plated mufflers stuffed with packing that are common in the after...(choose a part on the right to read more)
$2,337.50
Make a selection BES99725060SR Brombacher sport muffler for 997.2 GT3 / rs (sound version) with rsr style tips facts: - + 10 crank hp & + 10 crank torque - 2 3/4 tubing (70mm) straight through design for max. Power - weighs 28 lbs. (12.7 kg) - replaces stock side mufflers and stock center muffler - 36 lbs (16.3 kg) savings over stock system! - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - 2 x 3.5 (90mm) rsr angle cut tips - includes all necessary clamps and mounting brackets - made in Germany - 105 db - intoxicating cup car growl at idle, partial throttle and wide open throttle - no interior resonance - no dme programming necessary, does not alter emissions, 50 state legal in the u.s. For reference: 997 GT3 OEM ...(choose a part on the right to read more)
$3,023.90
Make a selection EL28606 This 6 pole cut off switch is the same style used in the factory Porsche cup cars. It has been designed to eliminate the possibility of the alternator circuit being damaged due to a heavy voltage surge that can occur with the use of a heavy duty single circuit on/off switch. When turned to the off position the engine will be automatically stopped due to the secondary switch function whereby the ignition is cut. This prevents engine 'run on' and is a vital safety factor especially in competition use. This switch is also a very simple and effective anti theft device for cars, trucks, boats and ag, vehicles. General FitmentALL
$53.90
Make a selection 269412351 Design must be functional - perfect symbiosis of comfort and design General FitmentALL
$1,376.94
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |